Why Are My Cameras Displaying in Monochrome?

Security cameras, infrared, black and white, color

One of the most common problems users possess with their security cameras is displaying pictures in black and white , when it needs to be in color. The picture may be clear and focused, but for several reason, the image is grayscale rather than colorized image. Not only can the particular black and white picture be annoying to check out, but it prevents observation of essential details like the color of someone’s tee shirt or vehicle.

REQUEST A QUOTE

Infrared Sensors Explained

When security cameras are subjected to low light circumstances, too dark for the normal visible gentle sensor to detect, the camera’s infrared lights and sensors engage. The particular camera arms its infrared lighting to illuminate its field associated with view. Most cameras in infrared mode will have a series of infrared LEDs that glow red (often situated around the lens) to indicate that they are on, because the human eye is unable to detect infrared light. Cameras are also equipped with the sensor that can see the infrared light reflecting off people and items in the viewing area. This creates a black and white image to the end-user.

Because the visible light messfühler is no longer picking up enough light to produce an image, the camera can no longer detect colors. Infrared light falls just outside the visible spectrum, beyond the edge of what we can see as reddish colored, so the camera sensor can only gauge the brightness of the infrared light highlighting to the camera. Bright infrared lamps appear white on the video give food to, and dimmer lights appear as varying shades of gray.

During normal operation, the particular infrared sensors and lights functionality properly and capture black and white video footage in low light scenarios such as at nighttime or in a dark room. However , if it is not dark out and the camera is still displaying in black and white one begins to wonder, what gives?

The Problem: The Infrared Sensor is Stuck Upon

If your camera can be displaying in black and white but there seems to be ample light, then something happens to be causing the infrared lights to stay on. There are a few different issues that can be leading to this concern. Continue reading for helpful troubleshooting tips made to help you get your cameras back to color . If your infrared security digital camera is done for, complete a quote and tell us what you require your replacement camera to do .

Power Cycle the particular Camera and Video Recorder

Sometimes a glitch may cause the infrared sensors on the digital camera to stay stuck in the “on” position. This can often become resolved by performing a power period, simply turning off the camera, wait a few seconds, and then turning it back on . This may potentially clear any kind of erroneous settings that have prevented the particular camera from switching back to color. If power cycling the digital camera does not yield the desired result, try power cycling the video recorder as well .

To learn more about infrared sensors and exactly what causes security cameras to flicker, understand Why Does My Security Camera Flicker at Night?

Inspect the Camera Lens and Sensor

Whenever infrared mode on the camera is engaged, the camera must process how much light it is filtering to learn whether to remain in infrared mode or to switch back to full color. In case something is obstructing the sensor, the camera may think it is always dark out and keep the infrared lights on. Conduct an examination of the camera lens and be sure to wipe away any dirt or debris . Of course , your concern could also be with the power source…

Black and white, orange cat on top of security camera pole

Test the Cable and Power

The issue can be caused by the camera not be getting the correct power or communication due to a faulty cable or power supply. The easiest way to detect this problem is by unplugging the problem camera and plugging in one you know to become working properly . If that camera is having the same issue, it might be an issue with the cable or power. If you suspect an issue with the cable or power supply, we all recommend consulting a professional .

Test the Camera

It is also a good idea to plug the camera you are having issues with into a cable that you know to become working properly . If the digital camera has the same issue, then its most likely a problem with the camera. Sadly, not all cameras can be fixed, and sometimes the only solution is to replace the camera with a new one.

Have it Repaired or Replaced by Manufacturer

In case you suspect the camera needs to be replaced, check your manufacturer’s warranty . The majority of manufacturers will not repair or replace the camera if it is damaged or even installed improperly, but oftentimes stuck infrared is the result of a manufacturer’s defect. Warranty policies vary from manufacturer to manufacturer and from supplier to supplier. Sadly, some warranty policies are virtually non-existent, and you’re on your own if your camera requirements repaired or replaced.

All equipment from Camera Protection Now comes with a manufacturer’s warranty, and everything installations performed by Camera Safety Now are guaranteed to be without any installation defects. If your camera supplier has left you high and dried out with a bad camera and no substitute, it’s time to find a new supplier. Depending on the age of the camera, you might be able to replace it with a much better camera for around the same price! If you want help identifying a good replacement camera, or need professional installation or troubleshooting, please contact us today in 800-440-1662.

Safety Camera Advice and Installation along with Camera Security Now

Security Consultant Johnny

Are you looking for security camera advice ? Ashton can give you a free security consultation for the location. Even if you’re not sure what you need, our security technicians will stroll you through what it takes to secure your business. No matter what kind of facility in which you are requesting surveillance support, Johnny can help you with all of your security needs! In case you have any questions about how thermal cameras work, what you need for your facility, or maybe the purchasing and installation process, get in touch with Johnny today at 800-440-1662 ext. 360 or fill out a fast, easy online estimate form .

Follow our blog to remain up-to-date with CameraSecurityNow. com plus follow us on social media. Join the discussion by commenting below.

It’s just fair to share… Share on Facebook Tweet about this on Twitter Share on LinkedIn Email this to someone